Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products

Menderes Kam; Ahnmet İpekçi; Hamit Saruhan

Research Article

Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products

Year 2017, Volume: 6 Issue: Özel Sayı (ISMSIT2017), 114 - 121, 29.12.2017

Menderes Kam Ahnmet İpekçi Hamit Saruhan

Abstract

3D
printing filling structures at prototyping and design stage are increasingly
important issue for products with complicated shapes. The objective of the
present study is to investigate 3D printing filling structures effect on
mechanical properties and surface roughness of PET-G (Polyethylene
Terephthalate Glycol) material products. The PET-G material was preferred
because of its durability, high transparency and odor characteristics. A
variety of methods are used to manufacture products. Each has its advantages
and drawbacks. One of these methods to adopt for this investigation was FDM
(Fused Deposition Modeling) 3D printing method. The FDM method was considered
that it has a direct effect on the mechanical properties and surface roughness
of the product. The experiments were carried out using PET-G materials with
different printing filling structures (rectilinear, triangular, full
honeycomb), at processing speed of 50 mm/s.
Uniaxial tensile tests, hardness measurements, and surface roughness
measurements of the printed products were carried out. The results were
analyzed and compared.

Keywords

3D Printer, PET-G, FDM, Filling structures

References

Ahrabi A.Z., 2009. Pet Atıkları Kullanılarak Kompozit Malzeme Üretiminin Araştırılması, Ankara Üniversitesi Fen Bilimleri Enstitüsü Yüksek Lisans Tezi, Kimya Mühendisliği anabilim Dalı, Ankara. Azari, Nikzad, S., 2009. The Evolution of Rapid Prototyping In Dentistry: A Review, Rapid Prototyping Journal, 216 – 225. Billiet, T., Vandenhaute, M., Schelfhout, J., Vlierberghe, S. V., Dubruel, P., 2012. A Review of Trends And Limitations In Hydrogel-Rapid Prototyping for Tissue Engineering, Biomaterials 33, 6020-6041. Çelik, D., 2015. Tersine Mühendislikle Üç Boyutlu Yazıcı Tasarımı Ve Üretimi, Yüksek Lisans Tezi, Karabük Üni., Fen Bil. Enstitüsü. Chhabra, M., Singh, R., 2011. Rapid Casting Solutions: A Review, Rapid Prototyping Journal, 328 -350. Herrmanna, K., Gärtnera, C., Güllmara, D., Krämera, M., Reichenbacha, J. R., 2014. 3D Printing of MRI Compatible Components: Why Every MRI Research Group Should Have A Low-Budget 3D Printer, Medical Engineering & Physics, 1373-1380. http://www.rigid3d.com/rigid3d-zero2-3d-yazici/ Kruth, J.P., Leu, M. C., Nakagawa, T., 1998. Progress in Additive Manufacturing and Rapid Prototyping, Keynote Papers, 47(2), 525-540 Roberson, D.A., Espalin, D., Wicker, R.B., 2013. 3D Printer Selection: A Decision-making Evaluation and Ranking Model, Virtual and Physical Prototyping, 201-212. Sood, A.K., Ohdar, R.K., Mahapatra, S.S., 2010. Parametric Appraisal of Mechanical Property of Fused Deposition Modelling Processed Part, Materials & Desing, 31(1), 287-295. Wang, W., Wang, T. Y., Yang, Z., Liu, L., Tong, X., Tong, W., Deng, J., Chen, F., and Liu, X. 2013. Cost-Effective Printing of 3D Objects With Skin-Frame Structures. ACM Trans. Graph. 32, 5. Wilson, S. 1990. A New Face of Aerospace Honeycomb. Materials & Design 11, 6, 323 – 326.

Year 2017, Volume: 6 Issue: Özel Sayı (ISMSIT2017), 114 - 121, 29.12.2017

Menderes Kam Ahnmet İpekçi Hamit Saruhan

Abstract

References

Ahrabi A.Z., 2009. Pet Atıkları Kullanılarak Kompozit Malzeme Üretiminin Araştırılması, Ankara Üniversitesi Fen Bilimleri Enstitüsü Yüksek Lisans Tezi, Kimya Mühendisliği anabilim Dalı, Ankara. Azari, Nikzad, S., 2009. The Evolution of Rapid Prototyping In Dentistry: A Review, Rapid Prototyping Journal, 216 – 225. Billiet, T., Vandenhaute, M., Schelfhout, J., Vlierberghe, S. V., Dubruel, P., 2012. A Review of Trends And Limitations In Hydrogel-Rapid Prototyping for Tissue Engineering, Biomaterials 33, 6020-6041. Çelik, D., 2015. Tersine Mühendislikle Üç Boyutlu Yazıcı Tasarımı Ve Üretimi, Yüksek Lisans Tezi, Karabük Üni., Fen Bil. Enstitüsü. Chhabra, M., Singh, R., 2011. Rapid Casting Solutions: A Review, Rapid Prototyping Journal, 328 -350. Herrmanna, K., Gärtnera, C., Güllmara, D., Krämera, M., Reichenbacha, J. R., 2014. 3D Printing of MRI Compatible Components: Why Every MRI Research Group Should Have A Low-Budget 3D Printer, Medical Engineering & Physics, 1373-1380. http://www.rigid3d.com/rigid3d-zero2-3d-yazici/ Kruth, J.P., Leu, M. C., Nakagawa, T., 1998. Progress in Additive Manufacturing and Rapid Prototyping, Keynote Papers, 47(2), 525-540 Roberson, D.A., Espalin, D., Wicker, R.B., 2013. 3D Printer Selection: A Decision-making Evaluation and Ranking Model, Virtual and Physical Prototyping, 201-212. Sood, A.K., Ohdar, R.K., Mahapatra, S.S., 2010. Parametric Appraisal of Mechanical Property of Fused Deposition Modelling Processed Part, Materials & Desing, 31(1), 287-295. Wang, W., Wang, T. Y., Yang, Z., Liu, L., Tong, X., Tong, W., Deng, J., Chen, F., and Liu, X. 2013. Cost-Effective Printing of 3D Objects With Skin-Frame Structures. ACM Trans. Graph. 32, 5. Wilson, S. 1990. A New Face of Aerospace Honeycomb. Materials & Design 11, 6, 323 – 326.

There are 1 citations in total.

Details

Subjects	Engineering
Journal Section	Araştırma Makaleleri
Authors	Menderes Kam Ahnmet İpekçi Hamit Saruhan
Publication Date	December 29, 2017
Published in Issue	Year 2017 Volume: 6 Issue: Özel Sayı (ISMSIT2017)

Cite

APA	Kam, M., İpekçi, A., & Saruhan, H. (2017). Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products. Gaziosmanpaşa Bilimsel Araştırma Dergisi, 6(Özel Sayı (ISMSIT2017), 114-121.
AMA	Kam M, İpekçi A, Saruhan H. Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products. GBAD. December 2017;6(Özel Sayı (ISMSIT2017):114-121.
Chicago	Kam, Menderes, Ahnmet İpekçi, and Hamit Saruhan. “Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products”. Gaziosmanpaşa Bilimsel Araştırma Dergisi 6, no. Özel Sayı (ISMSIT2017) (December 2017): 114-21.
EndNote	Kam M, İpekçi A, Saruhan H (December 1, 2017) Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products. Gaziosmanpaşa Bilimsel Araştırma Dergisi 6 Özel Sayı (ISMSIT2017) 114–121.
IEEE	M. Kam, A. İpekçi, and H. Saruhan, “Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products”, GBAD, vol. 6, no. Özel Sayı (ISMSIT2017), pp. 114–121, 2017.
ISNAD	Kam, Menderes et al. “Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products”. Gaziosmanpaşa Bilimsel Araştırma Dergisi 6/Özel Sayı (ISMSIT2017) (December 2017), 114-121.
JAMA	Kam M, İpekçi A, Saruhan H. Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products. GBAD. 2017;6:114–121.
MLA	Kam, Menderes et al. “Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products”. Gaziosmanpaşa Bilimsel Araştırma Dergisi, vol. 6, no. Özel Sayı (ISMSIT2017), 2017, pp. 114-21.
Vancouver	Kam M, İpekçi A, Saruhan H. Investigation of 3D Printing Filling Structures Effect on Mechanical Properties and Surface Roughness of PET-G Material Products. GBAD. 2017;6(Özel Sayı (ISMSIT2017):114-21.