Araştırma Makalesi
BibTex RIS Kaynak Göster

Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing

Yıl 2017, Cilt: 20 Sayı: 1, 159 - 164, 01.03.2017

Öz

typical rotating machinery system consists various components, such as rotor, support bearing, and disks. These components
pass out energy into the system when coincident to critical speeds. Ignoring such event might lead to disastrous breakdown of the
system. Due to necessity and vital contribution to most rotating machineries, the requirements on rolling element bearings have
become stricter every day. In this experimental study, the dynamic behavior and displacement of rotor supported by damped rolling
element bearing housing for different running speeds and load levels are analyzed and compared.

Kaynakça

  • 1. Arias-Montiel M., Silva-Navarro G. and Antonio-García A., “Active vibration control in a rotor system by an active suspension with linear actuators”, Journal of Applied Research and Technology, 12(5): 898-907, (2014).
  • 2. Dietl P., “Damping and stiffness characteristics of rolling element bearings - theory and experiment”, PhD Thesis, Technical University of Vienna, Austria, (1997).
  • 3. Zeillinger R, Springer H, Köttritsch H. “Experimental determination of damping in rolling bearing joints”, In Proceedings of 39th ASME International Gas Turbine and Aeroengine Congress, Netherlands, (1994).
  • 4. Yücel E. and Saruhan H., “Design optimization of rotor-bearing system considering critical speed using taguchi method”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi: 10.1177/0954408915578581, (2016).
  • 5. Bavastri CA, Ferreira EMDS, Espíndola, JJD, Lopes EMDO., “Modeling of dynamic rotors with flexible bearings due to the use of viscoelastic materials”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 30(1): 22-29, (2008).
  • 6. Dietl, P., Wensing, J. and Nijen, G. C., “Rolling bearing damping for dynamic analysis of multi-body systems - experimental and theoretical results”, Proceedings of the Institution of Mechanical Engineers, 214(1): 33-43, (2000).
  • 7. Wensing, J. A., “On the dynamics of ball bearings”. PhD Thesis, University of Twente, Netherlands, (1998).
  • 8. Taplak, H., Uzmay, İ. and Yıldrım Ş., “Design of artificial neural networks for rotor dynamics analysis of rotating machine systems”, Journal of Scientific and Industrial Research, 64(6): 411, (2005).
  • 9. Taplak, H, Erkaya, S. and Uzmay İ., “Experimental analysis on fault detection for a direct coupled rotor-bearing system”, Measurement, 46(1): 336-344, (2013).
  • 10. Arslan, H. and Aktürk, N., “An investigation of rolling element vibrations caused by local defects”, Journal of Tribology, 130(4): 041101, (2008).

Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing

Yıl 2017, Cilt: 20 Sayı: 1, 159 - 164, 01.03.2017

Öz

typical rotating machinery system consists various components, such as rotor, support bearing, and disks. These components

pass out energy into the system when coincident to critical speeds. Ignoring such event might lead to disastrous breakdown of the

system. Due to necessity and vital contribution to most rotating machineries, the requirements on rolling element bearings have

become stricter every day. In this experimental study, the dynamic behavior and displacement of rotor supported by damped rolling

element bearing housing for different running speeds and load levels are analyzed and compared.

Kaynakça

  • 1. Arias-Montiel M., Silva-Navarro G. and Antonio-García A., “Active vibration control in a rotor system by an active suspension with linear actuators”, Journal of Applied Research and Technology, 12(5): 898-907, (2014).
  • 2. Dietl P., “Damping and stiffness characteristics of rolling element bearings - theory and experiment”, PhD Thesis, Technical University of Vienna, Austria, (1997).
  • 3. Zeillinger R, Springer H, Köttritsch H. “Experimental determination of damping in rolling bearing joints”, In Proceedings of 39th ASME International Gas Turbine and Aeroengine Congress, Netherlands, (1994).
  • 4. Yücel E. and Saruhan H., “Design optimization of rotor-bearing system considering critical speed using taguchi method”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi: 10.1177/0954408915578581, (2016).
  • 5. Bavastri CA, Ferreira EMDS, Espíndola, JJD, Lopes EMDO., “Modeling of dynamic rotors with flexible bearings due to the use of viscoelastic materials”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 30(1): 22-29, (2008).
  • 6. Dietl, P., Wensing, J. and Nijen, G. C., “Rolling bearing damping for dynamic analysis of multi-body systems - experimental and theoretical results”, Proceedings of the Institution of Mechanical Engineers, 214(1): 33-43, (2000).
  • 7. Wensing, J. A., “On the dynamics of ball bearings”. PhD Thesis, University of Twente, Netherlands, (1998).
  • 8. Taplak, H., Uzmay, İ. and Yıldrım Ş., “Design of artificial neural networks for rotor dynamics analysis of rotating machine systems”, Journal of Scientific and Industrial Research, 64(6): 411, (2005).
  • 9. Taplak, H, Erkaya, S. and Uzmay İ., “Experimental analysis on fault detection for a direct coupled rotor-bearing system”, Measurement, 46(1): 336-344, (2013).
  • 10. Arslan, H. and Aktürk, N., “An investigation of rolling element vibrations caused by local defects”, Journal of Tribology, 130(4): 041101, (2008).
Toplam 10 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Hamit Saruhan Bu kişi benim

Menderes Kam

Fuat Kara Bu kişi benim

Yayımlanma Tarihi 1 Mart 2017
Gönderilme Tarihi 24 Mart 2016
Yayımlandığı Sayı Yıl 2017 Cilt: 20 Sayı: 1

Kaynak Göster

APA Saruhan, H., Kam, M., & Kara, F. (2017). Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing. Politeknik Dergisi, 20(1), 159-164.
AMA Saruhan H, Kam M, Kara F. Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing. Politeknik Dergisi. Mart 2017;20(1):159-164.
Chicago Saruhan, Hamit, Menderes Kam, ve Fuat Kara. “Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing”. Politeknik Dergisi 20, sy. 1 (Mart 2017): 159-64.
EndNote Saruhan H, Kam M, Kara F (01 Mart 2017) Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing. Politeknik Dergisi 20 1 159–164.
IEEE H. Saruhan, M. Kam, ve F. Kara, “Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing”, Politeknik Dergisi, c. 20, sy. 1, ss. 159–164, 2017.
ISNAD Saruhan, Hamit vd. “Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing”. Politeknik Dergisi 20/1 (Mart 2017), 159-164.
JAMA Saruhan H, Kam M, Kara F. Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing. Politeknik Dergisi. 2017;20:159–164.
MLA Saruhan, Hamit vd. “Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing”. Politeknik Dergisi, c. 20, sy. 1, 2017, ss. 159-64.
Vancouver Saruhan H, Kam M, Kara F. Dynamic Behavior Analysis of Rotor Supported by Damped Rolling Element Bearing Housing. Politeknik Dergisi. 2017;20(1):159-64.
 
TARANDIĞIMIZ DİZİNLER (ABSTRACTING / INDEXING)
181341319013191 13189 13187 13188 18016 

download Bu eser Creative Commons Atıf-AynıLisanslaPaylaş 4.0 Uluslararası ile lisanslanmıştır.