In this study, two varieties of faba beans were grown in two different locations at three different plant densities and their grain quality criteria were examined. As a result, the ash, oil, moisture, protein, starch and hundred grain weight (HGW) values of the faba beans varied between 3.44-3.76%, 1.16-1.70%, 10.63-11.58%, 25.71-31.15%, 37.86-44.75% and 97.53-157.50 g respectively. In correlation analysis, the highest interaction between moisture and oil; between protein and ash, oil and moisture; and between HGW and oil, moisture. In addition, it was determined that the significance level of the interaction among properties varies in terms of factors. PCA results, it was noted that each location formed separate groups. In general, all the features in Sanli-Urfa location were high and positive. In terms of varieties, the data of all properties except HGW were statistically the same, while the HGW value was high in Salkim variety. The distance row spacings significantly affected the starch and HGW properties, the highest values in terms of starch and HGW were obtained between the 60 cm and 50 cm row spacings respectively. According to these results, it was understood that the varieties and plant densities used significantly affected the quality criteria according to the locations.
Correlation analysis Principal component analysis Protein Quality criteria Starch
Kahramanmaraş Sütçü İmam Üniversitesi Bilimsel Araştırma Projeleri Birimi; TÜBİTAK 2237 BİDEB
2017/1-13YLS; 1129B371901423
Yunus Emre Çabar's master's thesis was used to obtain data on the Kahramanmaraş location of the research, and this thesis was supported by the KSU Scientific Research Projects fund with the number 2017/1-13YLS. This research was partially supported by ‘TÜBİTAK 2237 BİDEB Project number: 1129B371901423’. We thank our colleagues from ‘TÜBİTAK and Isparta University of Applied Sci-ences’ who provided insight and expertise that greatly assisted the research, although they may not agree with all of the interpretations/conclusions of this paper.
Bu çalışmada, iki çeşit bakla iki farklı lokasyonda üç farklı bitki yoğunluğunda yetiştirilmiş ve tane kalite kriterleri incelenmiştir. Sonuç olarak baklagillerin kül, yağ, nem, protein, nişasta ve yüz tane ağırlığı (HGW) değerleri sırasıyla %3.44-3.76, %1.16-1.70, %10.63-11.58, %25.71-31.15, %37.86-44.75 ve 97.53-157.50 g arasında değişmiştir. Korelasyon analizinde, nem ile yağ; protein ile kül, yağ ve nem; yüz tane ağırlığı ile yağ ve nem arasında önemli etkileşim gözlenmiştir. Ayrıca, özellikler arası etkileşimin anlamlılık düzeyinin faktörlere göre farklılık gösterdiği belirlenmiştir. PCA sonuçlarında, her lokasyonun ayrı gruplar oluşturduğu kaydedilmiştir. Genel olarak Şanlı-Urfa lokasyonunda tüm özellikler yüksek ve olumlu bulunmuştur. Çeşitler açısından yüz tane ağırlığı dışındaki tüm özelliklerin verileri istatistiksel olarak aynı iken, yüz tane ağırlığı değeri Salkım çeşidinde yüksektir. Sıra arası mesafeler nişasta ve HGW özelliklerini önemli ölçüde etkilemiş, nişasta ve HGW açısından en yüksek değerler sırasıyla 60 cm ve 50 cm sıra aralıkları arasında elde edilmiştir. Bu sonuçlara göre, kullanılan çeşitlerin ve bitki yoğunluklarının lokasyonlara göre kalite kriterlerini önemli ölçüde etkilediği anlaşılmıştır.
Korelasyon analizi Temel bileşenler analizi Protein Kalite kriterleri Nişasta
2017/1-13YLS; 1129B371901423
Birincil Dil | İngilizce |
---|---|
Konular | Mühendislik |
Bölüm | Makaleler |
Yazarlar | |
Proje Numarası | 2017/1-13YLS; 1129B371901423 |
Yayımlanma Tarihi | 20 Ağustos 2022 |
Yayımlandığı Sayı | Yıl 2022 Cilt: 26 Sayı: 2 |
e-ISSN: 1308-6529