Araştırma Makalesi
BibTex RIS Kaynak Göster

A Research on Utilizing of Discrete Element Method in the Design of Agricultural Machineries

Yıl 2018, , 304 - 311, 15.06.2018
https://doi.org/10.18016/ksudobil.308577

Öz

The energy required for tillage processes accounts for
a significant proportion of total energy usage in crop production. Development
of more efficient tillage tools is essential to reduce the energy consumption
and to increase agricultural production. Although there are some methods which
are currently being used to analyze and design agricultural machineries (i.e.
empirical, analytical and continuum numerical (Finite element method) methods),
each of which has its own shortcomings. In this study, as a novel approach
discrete element method was explained and then the possibility of using
discrete element method to design agricultural machineries was investigated.
For this purpose, draught forces and soil profile measured by Saunders (2002)
for soil-mouldboard plough interaction was simulated. Simulation results showed
that draught forces can be predicted with a maximum relative error of 20.5%,
while soil profile was simulated with 9.3 % relative error. Results of the
study proved that the discrete element method can effectively be used to design
agricultural machineries.

Kaynakça

  • Academia, 2015. Some useful numbers for rocks and soils. http://www.academia.edu/4056287/ SomeUseful_ Numbers_for_rocks_and_soils (Erişim tarihi: 15.04.2016)
  • Asaf, Z., Rubinstein, D., Shmulevich, I. 2007. Determination of Discrete Element Model Parameters Required for Soil tillage. Soil and Tillage Research. 92(1-2): 227-242.
  • Bravo, E.L., Tijskens, E., Suárez, M.H., Cueto, O.G., Ramon, H., 2014. Prediction Model for Non-Inversion Soil Tillage Implemented on Discrete Element Method. Computers and Electronics in Agriculture, 106, 120-127.
  • Budynas, R.G., Nisbett, K.J., 2012. Shigley's Mechanical Engineering Design, McGraw-Hill Education
  • Chen, Y., Munkholm, L.J., Nyord, T., 2013. A Discrete Element Model for Soil-Sweep Interaction in Three Different Soils. Soil and Tillage Research, 126: 34-41
  • Cundall, P.A., Strack, O.D.L., 1971. A Discrete Numerical Model for Granular Assemblies. Geotechnique, 29: 47-65.
  • EDEM, 2011. EDEM Theory Reference Guide. Edinburgh, UK, DEM Solutions. Fielke, J.M., 1999. Finite Element Modelling of the Interaction of the Cutting Edge of Tillage Implements with Soil. Journal of Agricultural Engineering Research, 74(1): 91-101.
  • Godwin, R.J., O’Dogherty, M.J., Saunders, C., Balafoutis, A.T., 2007. A Force Prediction Model for Mouldboard Ploughs Incorporating the Effects of Soil Characteristic Properties, Plough Geometric Factors and Ploughing Speed. Biosystems Engineering. 97(1): 117-129.
  • Hudson Tool Steel (2016). P20 Mold steel. http://www.hudsontoolsteel.com/technical-data/ steelP0 (Erişim tarihi: 20.02.2017)
  • Huser, A., Kvernvold, O., 1998. Prediction of Sand Erosion in Process and Pipe Components. In BHR Group Conference Series Publication (Vol. 31, pp. 217-228). Mechanical Engineering Publications Limited.
  • Karmakar, S., Kushawa, R.L., 2005. Simulation of Soil Deformation around a Tillage Tool Using Computational Fluid Dynamics. Transactions of ASAE, 48(3): 23-32.
  • Karmakar, S., Ashrafizadeh, S.R., Kushwaha, R.L., 2009. Experimental Validation of Computational Fluid Dynamics Modeling for Narrow Tillage Tool Draft. Journal of Terramechanics, 46(6): 277-283.
  • Kushwaha, R.L., Shen, J., 1995. Finite Element Analysis of the Dynamic Interaction between Soil and Tillage Tool. Transactions of the ASAE, 37(5): 1315-1319.
  • McKyes, E., 1985. Soil Cutting and Tillage. Amsterdam, The Netherlands. Raji, A.O., 1999. Discrete Element Modeliing of the Deformation of Bulk Agricultural Particles. PhD, University of Newcastle upon Tyne.
  • Saunders, C., 2002. Optimising the Performance of Shallow, High-Speed Mouldboard Ploughs. PhD, Cranfield University
  • Shmulevich, I., Asaf, Z., Rubinstein, D., 2007. Interaction between Soil and a Wide Cutting Blade Using the Discrete Element Method. Soil and Tillage Research, 97(1): 37-50.
  • Tanaka, H., Momozo, M., Oida, A., Yamazaki, M., 2000. Simulation of Soil Deformation and Resistance at Bar Penetration by Distinct Element Method. Journal of Terramechanics, 37:41-56.
  • Ucgul, M., Fielke, J.M., Saunders, C., 2014. 3D DEM Tillage Simulation: Validation for a Sweep Tool for a Cohesionless Soil. Soil and Tillage Research. 144: 220-227
  • Ucgul, M., Fielke, J.M., Saunders, C., 2015. Three-Dimensional Discrete Element Modelling (DEM) of Tillage: Accounting for Soil Cohesion and Adhesion. Biosystems Engineering. 129: 298-306.
  • Walton, O.R., Braun, R.L., 1986. Stress Calculations for Assemblies of Inelastic Spheres in Uniform shear. Acta Mechanica 63: 73-86.
  • Walton, O., 2006. Elastic-Plastic Contact Model. Company Report, DEM Solutions.

Ayrık Elemanlar Metodunun Tarım Makineleri Tasarımında Kullanımı Üzerine Bir Araştırma

Yıl 2018, , 304 - 311, 15.06.2018
https://doi.org/10.18016/ksudobil.308577

Öz

Tarımsal üretim için kullanılan enerjinin çok büyük bir kısmı toprak
işlemede kullanılmaktadır. Bu nedenle tarımda verimliliği artırmak ve enerji
kullanımını azaltmak için enerji gereksinimi düşük olan tarım alet ve
makinelerinin geliştirilmesi gereklidir. Tarım makinelerinin analiz ve tasarımı
için çeşitli metotlar kullanılıyor olsa da (örneğin: deneysel, analitik ve nümerik (sonlu elamanlar) metotlar) bu
metotların her birinin çeşitli dezavantajları bulunmaktadır. Bu çalışmada yeni
bir yöntem olan ayrık elemanlar metodu tanıtılmış ve bu metodun tarım
makineleri tasarımında kullanılabilirliği araştırılmıştır. Bu amaçla daha önce
Saunders (2002) tarafından kulaklı pulluk kullanılarak yapılmış olan deneysel
bir çalışma, ayrık elemanlar metodu kullanılarak çeki kuvvetinde maksimum %20.5
ve ortalama toprak profilinde % 9.3 bağıl hata ile simüle edilmiştir.
Çalışmanın sonuçları ayrık elemanlar metodunun tarım makineleri tasarımında
verimli bir şekilde kullanılabileceğini göstermiştir.

Kaynakça

  • Academia, 2015. Some useful numbers for rocks and soils. http://www.academia.edu/4056287/ SomeUseful_ Numbers_for_rocks_and_soils (Erişim tarihi: 15.04.2016)
  • Asaf, Z., Rubinstein, D., Shmulevich, I. 2007. Determination of Discrete Element Model Parameters Required for Soil tillage. Soil and Tillage Research. 92(1-2): 227-242.
  • Bravo, E.L., Tijskens, E., Suárez, M.H., Cueto, O.G., Ramon, H., 2014. Prediction Model for Non-Inversion Soil Tillage Implemented on Discrete Element Method. Computers and Electronics in Agriculture, 106, 120-127.
  • Budynas, R.G., Nisbett, K.J., 2012. Shigley's Mechanical Engineering Design, McGraw-Hill Education
  • Chen, Y., Munkholm, L.J., Nyord, T., 2013. A Discrete Element Model for Soil-Sweep Interaction in Three Different Soils. Soil and Tillage Research, 126: 34-41
  • Cundall, P.A., Strack, O.D.L., 1971. A Discrete Numerical Model for Granular Assemblies. Geotechnique, 29: 47-65.
  • EDEM, 2011. EDEM Theory Reference Guide. Edinburgh, UK, DEM Solutions. Fielke, J.M., 1999. Finite Element Modelling of the Interaction of the Cutting Edge of Tillage Implements with Soil. Journal of Agricultural Engineering Research, 74(1): 91-101.
  • Godwin, R.J., O’Dogherty, M.J., Saunders, C., Balafoutis, A.T., 2007. A Force Prediction Model for Mouldboard Ploughs Incorporating the Effects of Soil Characteristic Properties, Plough Geometric Factors and Ploughing Speed. Biosystems Engineering. 97(1): 117-129.
  • Hudson Tool Steel (2016). P20 Mold steel. http://www.hudsontoolsteel.com/technical-data/ steelP0 (Erişim tarihi: 20.02.2017)
  • Huser, A., Kvernvold, O., 1998. Prediction of Sand Erosion in Process and Pipe Components. In BHR Group Conference Series Publication (Vol. 31, pp. 217-228). Mechanical Engineering Publications Limited.
  • Karmakar, S., Kushawa, R.L., 2005. Simulation of Soil Deformation around a Tillage Tool Using Computational Fluid Dynamics. Transactions of ASAE, 48(3): 23-32.
  • Karmakar, S., Ashrafizadeh, S.R., Kushwaha, R.L., 2009. Experimental Validation of Computational Fluid Dynamics Modeling for Narrow Tillage Tool Draft. Journal of Terramechanics, 46(6): 277-283.
  • Kushwaha, R.L., Shen, J., 1995. Finite Element Analysis of the Dynamic Interaction between Soil and Tillage Tool. Transactions of the ASAE, 37(5): 1315-1319.
  • McKyes, E., 1985. Soil Cutting and Tillage. Amsterdam, The Netherlands. Raji, A.O., 1999. Discrete Element Modeliing of the Deformation of Bulk Agricultural Particles. PhD, University of Newcastle upon Tyne.
  • Saunders, C., 2002. Optimising the Performance of Shallow, High-Speed Mouldboard Ploughs. PhD, Cranfield University
  • Shmulevich, I., Asaf, Z., Rubinstein, D., 2007. Interaction between Soil and a Wide Cutting Blade Using the Discrete Element Method. Soil and Tillage Research, 97(1): 37-50.
  • Tanaka, H., Momozo, M., Oida, A., Yamazaki, M., 2000. Simulation of Soil Deformation and Resistance at Bar Penetration by Distinct Element Method. Journal of Terramechanics, 37:41-56.
  • Ucgul, M., Fielke, J.M., Saunders, C., 2014. 3D DEM Tillage Simulation: Validation for a Sweep Tool for a Cohesionless Soil. Soil and Tillage Research. 144: 220-227
  • Ucgul, M., Fielke, J.M., Saunders, C., 2015. Three-Dimensional Discrete Element Modelling (DEM) of Tillage: Accounting for Soil Cohesion and Adhesion. Biosystems Engineering. 129: 298-306.
  • Walton, O.R., Braun, R.L., 1986. Stress Calculations for Assemblies of Inelastic Spheres in Uniform shear. Acta Mechanica 63: 73-86.
  • Walton, O., 2006. Elastic-Plastic Contact Model. Company Report, DEM Solutions.
Toplam 21 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Bölüm ARAŞTIRMA MAKALESİ (Research Article)
Yazarlar

Mustafa Üçgül 0000-0001-8528-7490

Chris Saunders 0000-0003-2506-891X

Ali Aybek 0000-0003-3036-8204

Yayımlanma Tarihi 15 Haziran 2018
Gönderilme Tarihi 24 Nisan 2017
Kabul Tarihi 25 Ağustos 2017
Yayımlandığı Sayı Yıl 2018

Kaynak Göster

APA Üçgül, M., Saunders, C., & Aybek, A. (2018). Ayrık Elemanlar Metodunun Tarım Makineleri Tasarımında Kullanımı Üzerine Bir Araştırma. Kahramanmaraş Sütçü İmam Üniversitesi Tarım Ve Doğa Dergisi, 21(3), 304-311. https://doi.org/10.18016/ksudobil.308577

21082



2022-JIF = 0.500

2022-JCI = 0.170

Uluslararası Hakemli Dergi (International Peer Reviewed Journal)

       Dergimiz, herhangi bir başvuru veya yayımlama ücreti almamaktadır. (Free submission and publication)

      Yılda 6 sayı yayınlanır. (Published 6 times a year)


88x31.png 

Bu web sitesi Creative Commons Atıf 4.0 Uluslararası Lisansı ile lisanslanmıştır.

                 


Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi
e-ISSN: 2619-9149